And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
2:29.500
And
I configure APT to prefer an old version of cowsay
0.025
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
27.731
And
I accept adding "cowsay" to Additional Software
4.360
And
Additional Software is correctly configured for package "cowsay"
0.866
And
I shutdown Tails and wait for the computer to power off
6.425
And
I start Tails from USB drive "__internal" with network unplugged
1:1.501
And
I enable persistence
10.206
And
I configure APT to prefer an old version of cowsay
0.029
And
I disable the tails-virt-notify-user.service user unit
0.104
And
I log in to a new session
38.950
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
32.100
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.063
And
I prepare the Additional Software upgrade process to fail
0.070
And
the network is plugged
0.071
And
available upgrades have been checked
0.059
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
4.314
And
I can open the Additional Software configuration window from the notification
2.980
And
I shutdown Tails and wait for the computer to power off
2:8.145
And
I start Tails from USB drive "__internal" with network unplugged
1:1.014
And
I enable persistence
13.899
And
I configure APT to prefer an old version of cowsay
0.030
And
I log in to a new session
46.089
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
30.802
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.056
And
the network is plugged
0.078
Then
the Additional Software upgrade service has started
0.168
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.099