And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
2:34.957
And
I configure APT to prefer an old version of cowsay
0.030
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
29.248
And
I accept adding "cowsay" to Additional Software
5.194
And
Additional Software is correctly configured for package "cowsay"
0.960
And
I shutdown Tails and wait for the computer to power off
9.275
And
I start Tails from USB drive "__internal" with network unplugged
1:6.474
And
I enable persistence
13.921
And
I configure APT to prefer an old version of cowsay
0.027
And
I disable the tails-virt-notify-user.service user unit
0.083
And
I log in to a new session
46.342
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
32.464
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.071
And
I prepare the Additional Software upgrade process to fail
0.102
And
the network is plugged
0.125
And
available upgrades have been checked
0.085
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
6.598
And
I can open the Additional Software configuration window from the notification
4.326
And
I shutdown Tails and wait for the computer to power off
14.758
And
I start Tails from USB drive "__internal" with network unplugged
1:17.450
And
I enable persistence
20.210
And
I configure APT to prefer an old version of cowsay
0.035
And
I log in to a new session
34.515
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
43.863
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.076
And
the network is plugged
0.098
Then
the Additional Software upgrade service has started
0.207
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.103