And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
2:35.639
And
I configure APT to prefer an old version of cowsay
0.031
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
26.100
And
I accept adding "cowsay" to Additional Software
5.692
And
Additional Software is correctly configured for package "cowsay"
0.904
And
I shutdown Tails and wait for the computer to power off
4.440
And
I start Tails from USB drive "__internal" with network unplugged
1:0.989
And
I enable persistence
11.007
And
I configure APT to prefer an old version of cowsay
0.028
And
I disable the tails-virt-notify-user.service user unit
0.090
And
I log in to a new session
37.679
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
41.244
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.061
And
I prepare the Additional Software upgrade process to fail
0.067
And
the network is plugged
0.064
And
available upgrades have been checked
0.100
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
4.467
And
I can open the Additional Software configuration window from the notification
2.834
And
I shutdown Tails and wait for the computer to power off
2:2.700
And
I start Tails from USB drive "__internal" with network unplugged
1:0.849
And
I enable persistence
12.644
And
I configure APT to prefer an old version of cowsay
0.029
And
I log in to a new session
41.575
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
32.614
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.051
And
the network is plugged
0.062
Then
the Additional Software upgrade service has started
0.169
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.088