And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
2:25.968
And
I configure APT to prefer an old version of cowsay
0.028
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
25.931
And
I accept adding "cowsay" to Additional Software
5.927
And
Additional Software is correctly configured for package "cowsay"
0.953
And
I shutdown Tails and wait for the computer to power off
6.613
And
I start Tails from USB drive "__internal" with network unplugged
1:2.697
And
I enable persistence
10.630
And
I configure APT to prefer an old version of cowsay
0.027
And
I disable the tails-virt-notify-user.service user unit
0.082
And
I log in to a new session
40.145
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
41.949
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.058
And
I prepare the Additional Software upgrade process to fail
0.065
And
the network is plugged
0.077
And
available upgrades have been checked
1.132
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
2.910
And
I can open the Additional Software configuration window from the notification
3.918
And
I shutdown Tails and wait for the computer to power off
12.568
And
I start Tails from USB drive "__internal" with network unplugged
1:3.475
And
I enable persistence
11.504
And
I configure APT to prefer an old version of cowsay
0.025
And
I log in to a new session
39.960
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
41.469
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.057
And
the network is plugged
0.088
Then
the Additional Software upgrade service has started
0.170
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.102