And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
2:17.073
And
I configure APT to prefer an old version of cowsay
0.024
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
25.670
And
I accept adding "cowsay" to Additional Software
4.230
And
Additional Software is correctly configured for package "cowsay"
0.877
And
I shutdown Tails and wait for the computer to power off
4.737
And
I start Tails from USB drive "__internal" with network unplugged
59.735
And
I enable persistence
11.267
And
I configure APT to prefer an old version of cowsay
0.025
And
I disable the tails-virt-notify-user.service user unit
0.099
And
I log in to a new session
41.231
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
31.471
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.055
And
I prepare the Additional Software upgrade process to fail
0.057
And
the network is plugged
0.078
And
available upgrades have been checked
0.063
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
2.808
And
I can open the Additional Software configuration window from the notification
2.296
And
I shutdown Tails and wait for the computer to power off
13.109
And
I start Tails from USB drive "__internal" with network unplugged
1:5.974
And
I enable persistence
10.915
And
I configure APT to prefer an old version of cowsay
0.030
And
I log in to a new session
39.563
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
41.305
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.044
And
the network is plugged
0.066
Then
the Additional Software upgrade service has started
0.132
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.100