And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
2:18.783
And
I configure APT to prefer an old version of cowsay
0.028
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
25.955
And
I accept adding "cowsay" to Additional Software
5.712
And
Additional Software is correctly configured for package "cowsay"
0.906
And
I shutdown Tails and wait for the computer to power off
4.295
And
I start Tails from USB drive "__internal" with network unplugged
59.130
And
I enable persistence
11.089
And
I configure APT to prefer an old version of cowsay
0.050
And
I disable the tails-virt-notify-user.service user unit
0.083
And
I log in to a new session
43.739
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
31.221
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.049
And
I prepare the Additional Software upgrade process to fail
0.065
And
the network is plugged
0.060
And
available upgrades have been checked
1.411
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
3.188
And
I can open the Additional Software configuration window from the notification
2.764
And
I shutdown Tails and wait for the computer to power off
18.110
And
I start Tails from USB drive "__internal" with network unplugged
1:7.228
And
I enable persistence
12.190
And
I configure APT to prefer an old version of cowsay
0.027
And
I log in to a new session
35.545
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
41.899
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.056
And
the network is plugged
0.083
Then
the Additional Software upgrade service has started
0.162
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.103