And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
2:24.600
And
I configure APT to prefer an old version of cowsay
0.033
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
29.458
And
I accept adding "cowsay" to Additional Software
3.140
And
Additional Software is correctly configured for package "cowsay"
0.963
And
I shutdown Tails and wait for the computer to power off
6.804
And
I start Tails from USB drive "__internal" with network unplugged
1:0.352
And
I enable persistence
11.697
And
I configure APT to prefer an old version of cowsay
0.023
And
I disable the tails-virt-notify-user.service user unit
0.083
And
I log in to a new session
40.455
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
32.753
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.053
And
I prepare the Additional Software upgrade process to fail
0.069
And
the network is plugged
0.080
And
available upgrades have been checked
0.070
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
3.688
And
I can open the Additional Software configuration window from the notification
2.834
And
I shutdown Tails and wait for the computer to power off
2:3.373
And
I start Tails from USB drive "__internal" with network unplugged
1:0.739
And
I enable persistence
13.883
And
I configure APT to prefer an old version of cowsay
0.032
And
I log in to a new session
45.703
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
32.745
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.058
And
the network is plugged
0.065
Then
the Additional Software upgrade service has started
0.166
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.083