And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
2:27.631
And
I configure APT to prefer an old version of cowsay
0.035
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
31.471
And
I accept adding "cowsay" to Additional Software
3.581
And
Additional Software is correctly configured for package "cowsay"
1.002
And
I shutdown Tails and wait for the computer to power off
6.403
And
I start Tails from USB drive "__internal" with network unplugged
1:9.685
And
I enable persistence
14.820
And
I configure APT to prefer an old version of cowsay
0.040
And
I disable the tails-virt-notify-user.service user unit
0.114
And
I log in to a new session
44.514
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
31.577
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.055
And
I prepare the Additional Software upgrade process to fail
0.082
And
the network is plugged
0.076
And
available upgrades have been checked
0.063
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
1.103
And
I can open the Additional Software configuration window from the notification
2.829
And
I shutdown Tails and wait for the computer to power off
2:7.686
And
I start Tails from USB drive "__internal" with network unplugged
1:4.287
And
I enable persistence
15.195
And
I configure APT to prefer an old version of cowsay
0.026
And
I log in to a new session
42.333
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
41.982
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.065
And
the network is plugged
0.064
Then
the Additional Software upgrade service has started
0.205
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.098