And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
2:21.630
And
I configure APT to prefer an old version of cowsay
0.024
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
35.958
And
I accept adding "cowsay" to Additional Software
4.264
And
Additional Software is correctly configured for package "cowsay"
1.032
And
I shutdown Tails and wait for the computer to power off
4.285
And
I start Tails from USB drive "__internal" with network unplugged
59.899
And
I enable persistence
10.452
And
I configure APT to prefer an old version of cowsay
0.025
And
I disable the tails-virt-notify-user.service user unit
0.080
And
I log in to a new session
40.203
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
31.177
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.050
And
I prepare the Additional Software upgrade process to fail
0.063
And
the network is plugged
0.062
And
available upgrades have been checked
0.063
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
2.111
And
I can open the Additional Software configuration window from the notification
2.784
And
I shutdown Tails and wait for the computer to power off
12.975
And
I start Tails from USB drive "__internal" with network unplugged
1:0.386
And
I enable persistence
11.769
And
I configure APT to prefer an old version of cowsay
0.030
And
I log in to a new session
45.187
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
32.077
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.067
And
the network is plugged
0.064
Then
the Additional Software upgrade service has started
0.145
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.095