And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
2:19.604
And
I configure APT to prefer an old version of cowsay
0.026
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
25.766
And
I accept adding "cowsay" to Additional Software
5.556
And
Additional Software is correctly configured for package "cowsay"
0.876
And
I shutdown Tails and wait for the computer to power off
4.317
And
I start Tails from USB drive "__internal" with network unplugged
1:0.054
And
I enable persistence
10.990
And
I configure APT to prefer an old version of cowsay
0.024
And
I disable the tails-virt-notify-user.service user unit
0.087
And
I log in to a new session
38.812
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
31.610
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.052
And
I prepare the Additional Software upgrade process to fail
0.068
And
the network is plugged
0.077
And
available upgrades have been checked
0.054
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
4.003
And
I can open the Additional Software configuration window from the notification
2.418
And
I shutdown Tails and wait for the computer to power off
2:7.308
And
I start Tails from USB drive "__internal" with network unplugged
1:6.532
And
I enable persistence
12.592
And
I configure APT to prefer an old version of cowsay
0.028
And
I log in to a new session
37.694
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
31.617
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.063
And
the network is plugged
0.066
Then
the Additional Software upgrade service has started
0.163
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.108