And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
2:21.073
And
I configure APT to prefer an old version of cowsay
0.029
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
25.762
And
I accept adding "cowsay" to Additional Software
5.579
And
Additional Software is correctly configured for package "cowsay"
0.929
And
I shutdown Tails and wait for the computer to power off
6.296
And
I start Tails from USB drive "__internal" with network unplugged
1:0.832
And
I enable persistence
12.862
And
I configure APT to prefer an old version of cowsay
0.030
And
I disable the tails-virt-notify-user.service user unit
0.089
And
I log in to a new session
39.420
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
41.451
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.057
And
I prepare the Additional Software upgrade process to fail
0.076
And
the network is plugged
0.097
And
available upgrades have been checked
1.159
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
3.788
And
I can open the Additional Software configuration window from the notification
2.983
And
I shutdown Tails and wait for the computer to power off
2:2.527
And
I start Tails from USB drive "__internal" with network unplugged
1:0.135
And
I enable persistence
14.142
And
I configure APT to prefer an old version of cowsay
0.045
And
I log in to a new session
40.378
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
42.098
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.068
And
the network is plugged
0.077
Then
the Additional Software upgrade service has started
0.177
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.100