And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
2:35.701
And
I configure APT to prefer an old version of cowsay
0.027
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
26.119
And
I accept adding "cowsay" to Additional Software
6.746
And
Additional Software is correctly configured for package "cowsay"
0.989
And
I shutdown Tails and wait for the computer to power off
4.629
And
I start Tails from USB drive "__internal" with network unplugged
1:2.554
And
I enable persistence
13.028
And
I configure APT to prefer an old version of cowsay
0.032
And
I disable the tails-virt-notify-user.service user unit
0.089
And
I log in to a new session
40.201
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
31.929
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.049
And
I prepare the Additional Software upgrade process to fail
0.104
And
the network is plugged
0.072
And
available upgrades have been checked
0.073
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
12.573
And
I can open the Additional Software configuration window from the notification
2.588
And
I shutdown Tails and wait for the computer to power off
2:2.261
And
I start Tails from USB drive "__internal" with network unplugged
1:1.450
And
I enable persistence
11.906
And
I configure APT to prefer an old version of cowsay
0.036
And
I log in to a new session
40.221
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
41.837
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.069
And
the network is plugged
0.066
Then
the Additional Software upgrade service has started
0.167
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.106