And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
2:29.840
And
I configure APT to prefer an old version of cowsay
0.032
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
26.239
And
I accept adding "cowsay" to Additional Software
6.925
And
Additional Software is correctly configured for package "cowsay"
1.067
And
I shutdown Tails and wait for the computer to power off
6.718
And
I start Tails from USB drive "__internal" with network unplugged
1:3.159
And
I enable persistence
12.948
And
I configure APT to prefer an old version of cowsay
0.031
And
I disable the tails-virt-notify-user.service user unit
0.104
And
I log in to a new session
42.227
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
32.292
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.064
And
I prepare the Additional Software upgrade process to fail
0.084
And
the network is plugged
0.264
And
available upgrades have been checked
1.187
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
2.747
And
I can open the Additional Software configuration window from the notification
2.868
And
I shutdown Tails and wait for the computer to power off
2:2.979
And
I start Tails from USB drive "__internal" with network unplugged
1:1.118
And
I enable persistence
14.042
And
I configure APT to prefer an old version of cowsay
0.026
And
I log in to a new session
42.841
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
31.546
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.069
And
the network is plugged
0.085
Then
the Additional Software upgrade service has started
0.181
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.096