And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
2:23.319
And
I configure APT to prefer an old version of cowsay
0.042
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
30.092
And
I accept adding "cowsay" to Additional Software
4.470
And
Additional Software is correctly configured for package "cowsay"
0.961
And
I shutdown Tails and wait for the computer to power off
4.594
And
I start Tails from USB drive "__internal" with network unplugged
1:3.271
And
I enable persistence
13.830
And
I configure APT to prefer an old version of cowsay
0.031
And
I disable the tails-virt-notify-user.service user unit
0.089
And
I log in to a new session
35.693
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
31.763
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.073
And
I prepare the Additional Software upgrade process to fail
0.081
And
the network is plugged
0.077
And
available upgrades have been checked
0.104
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
5.846
And
I can open the Additional Software configuration window from the notification
3.337
And
I shutdown Tails and wait for the computer to power off
2:3.417
And
I start Tails from USB drive "__internal" with network unplugged
1:1.018
And
I enable persistence
17.018
And
I configure APT to prefer an old version of cowsay
0.029
And
I log in to a new session
42.748
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
41.244
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.064
And
the network is plugged
0.070
Then
the Additional Software upgrade service has started
0.228
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.102