And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
2:22.952
And
I configure APT to prefer an old version of cowsay
0.024
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
25.855
And
I accept adding "cowsay" to Additional Software
5.326
And
Additional Software is correctly configured for package "cowsay"
0.847
And
I shutdown Tails and wait for the computer to power off
6.230
And
I start Tails from USB drive "__internal" with network unplugged
59.605
And
I enable persistence
10.241
And
I configure APT to prefer an old version of cowsay
0.025
And
I disable the tails-virt-notify-user.service user unit
0.083
And
I log in to a new session
38.610
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
31.457
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.069
And
I prepare the Additional Software upgrade process to fail
0.059
And
the network is plugged
0.079
And
available upgrades have been checked
1.161
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
3.998
And
I can open the Additional Software configuration window from the notification
3.071
And
I shutdown Tails and wait for the computer to power off
13.368
And
I start Tails from USB drive "__internal" with network unplugged
59.975
And
I enable persistence
11.763
And
I configure APT to prefer an old version of cowsay
0.026
And
I log in to a new session
39.907
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
41.455
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.061
And
the network is plugged
0.060
Then
the Additional Software upgrade service has started
0.179
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.101