And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
2:28.402
And
I configure APT to prefer an old version of cowsay
0.035
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
25.785
And
I accept adding "cowsay" to Additional Software
6.938
And
Additional Software is correctly configured for package "cowsay"
0.911
And
I shutdown Tails and wait for the computer to power off
6.392
And
I start Tails from USB drive "__internal" with network unplugged
1:2.335
And
I enable persistence
12.919
And
I configure APT to prefer an old version of cowsay
0.044
And
I disable the tails-virt-notify-user.service user unit
0.158
And
I log in to a new session
41.382
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
41.725
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.067
And
I prepare the Additional Software upgrade process to fail
0.065
And
the network is plugged
0.077
And
available upgrades have been checked
1.244
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
3.762
And
I can open the Additional Software configuration window from the notification
3.081
And
I shutdown Tails and wait for the computer to power off
2:3.134
And
I start Tails from USB drive "__internal" with network unplugged
1:0.876
And
I enable persistence
13.080
And
I configure APT to prefer an old version of cowsay
0.030
And
I log in to a new session
42.469
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
42.548
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.097
And
the network is plugged
0.564
Then
the Additional Software upgrade service has started
0.184
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.100