And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
2:20.414
And
I configure APT to prefer an old version of cowsay
0.027
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
29.168
And
I accept adding "cowsay" to Additional Software
4.390
And
Additional Software is correctly configured for package "cowsay"
1.012
And
I shutdown Tails and wait for the computer to power off
6.418
And
I start Tails from USB drive "__internal" with network unplugged
58.556
And
I enable persistence
13.172
And
I configure APT to prefer an old version of cowsay
0.025
And
I disable the tails-virt-notify-user.service user unit
0.086
And
I log in to a new session
43.039
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
31.771
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.080
And
I prepare the Additional Software upgrade process to fail
0.079
And
the network is plugged
0.087
And
available upgrades have been checked
0.061
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
3.799
And
I can open the Additional Software configuration window from the notification
2.882
And
I shutdown Tails and wait for the computer to power off
13.428
And
I start Tails from USB drive "__internal" with network unplugged
1:8.137
And
I enable persistence
12.126
And
I configure APT to prefer an old version of cowsay
0.027
And
I log in to a new session
43.190
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
41.709
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.050
And
the network is plugged
0.072
Then
the Additional Software upgrade service has started
0.163
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.099