And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
2:19.601
And
I configure APT to prefer an old version of cowsay
0.037
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
25.659
And
I accept adding "cowsay" to Additional Software
6.629
And
Additional Software is correctly configured for package "cowsay"
1.039
And
I shutdown Tails and wait for the computer to power off
8.509
And
I start Tails from USB drive "__internal" with network unplugged
1:8.580
And
I enable persistence
11.299
And
I configure APT to prefer an old version of cowsay
0.027
And
I disable the tails-virt-notify-user.service user unit
0.085
And
I log in to a new session
43.371
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
32.620
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.051
And
I prepare the Additional Software upgrade process to fail
0.076
And
the network is plugged
0.075
And
available upgrades have been checked
0.132
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
3.939
And
I can open the Additional Software configuration window from the notification
2.049
And
I shutdown Tails and wait for the computer to power off
2:2.190
And
I start Tails from USB drive "__internal" with network unplugged
1:0.797
And
I enable persistence
11.806
And
I configure APT to prefer an old version of cowsay
0.028
And
I log in to a new session
38.781
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
41.290
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.061
And
the network is plugged
0.066
Then
the Additional Software upgrade service has started
0.170
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.109