And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
2:21.752
And
I configure APT to prefer an old version of cowsay
0.024
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
29.598
And
I accept adding "cowsay" to Additional Software
4.347
And
Additional Software is correctly configured for package "cowsay"
1.061
And
I shutdown Tails and wait for the computer to power off
6.272
And
I start Tails from USB drive "__internal" with network unplugged
1:1.110
And
I enable persistence
11.258
And
I configure APT to prefer an old version of cowsay
0.031
And
I disable the tails-virt-notify-user.service user unit
0.090
And
I log in to a new session
40.248
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
41.247
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.075
And
I prepare the Additional Software upgrade process to fail
0.070
And
the network is plugged
0.076
And
available upgrades have been checked
1.218
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
3.783
And
I can open the Additional Software configuration window from the notification
3.660
And
I shutdown Tails and wait for the computer to power off
2:8.019
And
I start Tails from USB drive "__internal" with network unplugged
1:5.731
And
I enable persistence
12.926
And
I configure APT to prefer an old version of cowsay
0.025
And
I log in to a new session
41.795
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
42.144
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.066
And
the network is plugged
0.076
Then
the Additional Software upgrade service has started
0.212
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.108