And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
2:14.430
And
I configure APT to prefer an old version of cowsay
0.024
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
25.850
And
I accept adding "cowsay" to Additional Software
6.709
And
Additional Software is correctly configured for package "cowsay"
0.915
And
I shutdown Tails and wait for the computer to power off
6.316
And
I start Tails from USB drive "__internal" with network unplugged
56.725
And
I enable persistence
11.538
And
I configure APT to prefer an old version of cowsay
0.027
And
I disable the tails-virt-notify-user.service user unit
0.079
And
I log in to a new session
37.015
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
30.830
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.072
And
I prepare the Additional Software upgrade process to fail
0.077
And
the network is plugged
0.123
And
available upgrades have been checked
1.241
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
2.608
And
I can open the Additional Software configuration window from the notification
2.592
And
I shutdown Tails and wait for the computer to power off
13.463
And
I start Tails from USB drive "__internal" with network unplugged
58.921
And
I enable persistence
12.918
And
I configure APT to prefer an old version of cowsay
0.046
And
I log in to a new session
38.663
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
31.610
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.062
And
the network is plugged
0.071
Then
the Additional Software upgrade service has started
0.155
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.084