And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
2:30.008
And
I configure APT to prefer an old version of cowsay
0.026
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
30.281
And
I accept adding "cowsay" to Additional Software
6.574
And
Additional Software is correctly configured for package "cowsay"
0.951
And
I shutdown Tails and wait for the computer to power off
6.836
And
I start Tails from USB drive "__internal" with network unplugged
1:3.081
And
I enable persistence
13.673
And
I configure APT to prefer an old version of cowsay
0.035
And
I disable the tails-virt-notify-user.service user unit
0.095
And
I log in to a new session
40.291
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
41.922
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.080
And
I prepare the Additional Software upgrade process to fail
0.080
And
the network is plugged
0.081
And
available upgrades have been checked
1.133
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
3.264
And
I can open the Additional Software configuration window from the notification
2.581
And
I shutdown Tails and wait for the computer to power off
2:7.569
And
I start Tails from USB drive "__internal" with network unplugged
1:1.371
And
I enable persistence
14.407
And
I configure APT to prefer an old version of cowsay
0.033
And
I log in to a new session
42.373
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
32.573
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.069
And
the network is plugged
0.077
Then
the Additional Software upgrade service has started
0.187
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.117