And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
2:27.098
And
I configure APT to prefer an old version of cowsay
0.032
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
26.448
And
I accept adding "cowsay" to Additional Software
6.894
And
Additional Software is correctly configured for package "cowsay"
0.856
And
I shutdown Tails and wait for the computer to power off
6.445
And
I start Tails from USB drive "__internal" with network unplugged
58.764
And
I enable persistence
13.102
And
I configure APT to prefer an old version of cowsay
0.027
And
I disable the tails-virt-notify-user.service user unit
0.099
And
I log in to a new session
39.137
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
42.080
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.075
And
I prepare the Additional Software upgrade process to fail
0.071
And
the network is plugged
0.072
And
available upgrades have been checked
1.189
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
2.645
And
I can open the Additional Software configuration window from the notification
2.431
And
I shutdown Tails and wait for the computer to power off
12.598
And
I start Tails from USB drive "__internal" with network unplugged
1:6.078
And
I enable persistence
15.268
And
I configure APT to prefer an old version of cowsay
0.025
And
I log in to a new session
38.976
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
41.318
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.064
And
the network is plugged
0.069
Then
the Additional Software upgrade service has started
0.199
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.083