And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
2:13.208
And
I configure APT to prefer an old version of cowsay
0.026
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
25.504
And
I accept adding "cowsay" to Additional Software
5.330
And
Additional Software is correctly configured for package "cowsay"
0.825
And
I shutdown Tails and wait for the computer to power off
6.410
And
I start Tails from USB drive "__internal" with network unplugged
58.428
And
I enable persistence
11.720
And
I configure APT to prefer an old version of cowsay
0.024
And
I disable the tails-virt-notify-user.service user unit
0.093
And
I log in to a new session
36.462
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
31.694
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.060
And
I prepare the Additional Software upgrade process to fail
0.067
And
the network is plugged
0.072
And
available upgrades have been checked
1.548
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
4.216
And
I can open the Additional Software configuration window from the notification
3.171
And
I shutdown Tails and wait for the computer to power off
18.273
And
I start Tails from USB drive "__internal" with network unplugged
58.268
And
I enable persistence
12.157
And
I configure APT to prefer an old version of cowsay
0.032
And
I log in to a new session
38.551
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
32.078
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.057
And
the network is plugged
0.080
Then
the Additional Software upgrade service has started
0.165
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.101