And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
2:19.207
And
I configure APT to prefer an old version of cowsay
0.025
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
25.561
And
I accept adding "cowsay" to Additional Software
6.894
And
Additional Software is correctly configured for package "cowsay"
0.908
And
I shutdown Tails and wait for the computer to power off
4.419
And
I start Tails from USB drive "__internal" with network unplugged
59.108
And
I enable persistence
11.458
And
I configure APT to prefer an old version of cowsay
0.026
And
I disable the tails-virt-notify-user.service user unit
0.081
And
I log in to a new session
41.526
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
31.589
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.055
And
I prepare the Additional Software upgrade process to fail
0.094
And
the network is plugged
0.072
And
available upgrades have been checked
0.060
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
4.635
And
I can open the Additional Software configuration window from the notification
2.875
And
I shutdown Tails and wait for the computer to power off
17.924
And
I start Tails from USB drive "__internal" with network unplugged
57.988
And
I enable persistence
12.572
And
I configure APT to prefer an old version of cowsay
0.031
And
I log in to a new session
39.327
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
30.992
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.055
And
the network is plugged
0.087
Then
the Additional Software upgrade service has started
0.166
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.092