And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
2:20.359
And
I configure APT to prefer an old version of cowsay
0.038
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
29.232
And
I accept adding "cowsay" to Additional Software
4.437
And
Additional Software is correctly configured for package "cowsay"
0.979
And
I shutdown Tails and wait for the computer to power off
6.556
And
I start Tails from USB drive "__internal" with network unplugged
1:0.121
And
I enable persistence
13.046
And
I configure APT to prefer an old version of cowsay
0.028
And
I disable the tails-virt-notify-user.service user unit
0.122
And
I log in to a new session
39.459
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
31.343
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.065
And
I prepare the Additional Software upgrade process to fail
0.069
And
the network is plugged
0.077
And
available upgrades have been checked
1.184
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
5.569
And
I can open the Additional Software configuration window from the notification
3.849
And
I shutdown Tails and wait for the computer to power off
2:3.633
And
I start Tails from USB drive "__internal" with network unplugged
57.488
And
I enable persistence
12.862
And
I configure APT to prefer an old version of cowsay
0.032
And
I log in to a new session
39.750
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
31.776
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.059
And
the network is plugged
0.136
Then
the Additional Software upgrade service has started
0.152
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.088