And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
2:18.361
And
I configure APT to prefer an old version of cowsay
0.026
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
25.498
And
I accept adding "cowsay" to Additional Software
5.737
And
Additional Software is correctly configured for package "cowsay"
0.854
And
I shutdown Tails and wait for the computer to power off
4.735
And
I start Tails from USB drive "__internal" with network unplugged
59.009
And
I enable persistence
12.165
And
I configure APT to prefer an old version of cowsay
0.024
And
I disable the tails-virt-notify-user.service user unit
0.102
And
I log in to a new session
41.944
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
30.965
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.063
And
I prepare the Additional Software upgrade process to fail
0.074
And
the network is plugged
0.077
And
available upgrades have been checked
1.265
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
3.777
And
I can open the Additional Software configuration window from the notification
3.430
And
I shutdown Tails and wait for the computer to power off
2:2.768
And
I start Tails from USB drive "__internal" with network unplugged
58.706
And
I enable persistence
12.088
And
I configure APT to prefer an old version of cowsay
0.030
And
I log in to a new session
38.922
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
32.408
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.057
And
the network is plugged
0.073
Then
the Additional Software upgrade service has started
0.166
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.075