And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
2:23.537
And
I configure APT to prefer an old version of cowsay
0.025
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
30.956
And
I accept adding "cowsay" to Additional Software
3.263
And
Additional Software is correctly configured for package "cowsay"
1.244
And
I shutdown Tails and wait for the computer to power off
6.637
And
I start Tails from USB drive "__internal" with network unplugged
59.774
And
I enable persistence
13.914
And
I configure APT to prefer an old version of cowsay
0.025
And
I disable the tails-virt-notify-user.service user unit
0.075
And
I log in to a new session
36.919
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
31.873
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.061
And
I prepare the Additional Software upgrade process to fail
0.057
And
the network is plugged
0.065
And
available upgrades have been checked
0.052
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
4.032
And
I can open the Additional Software configuration window from the notification
4.484
And
I shutdown Tails and wait for the computer to power off
17.883
And
I start Tails from USB drive "__internal" with network unplugged
58.362
And
I enable persistence
11.770
And
I configure APT to prefer an old version of cowsay
0.024
And
I log in to a new session
38.496
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
42.181
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.060
And
the network is plugged
0.072
Then
the Additional Software upgrade service has started
0.192
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.100