And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
2:28.867
And
I configure APT to prefer an old version of cowsay
0.026
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
25.901
And
I accept adding "cowsay" to Additional Software
6.950
And
Additional Software is correctly configured for package "cowsay"
0.989
And
I shutdown Tails and wait for the computer to power off
6.315
And
I start Tails from USB drive "__internal" with network unplugged
1:0.392
And
I enable persistence
11.547
And
I configure APT to prefer an old version of cowsay
0.026
And
I disable the tails-virt-notify-user.service user unit
0.079
And
I log in to a new session
38.551
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
41.822
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.069
And
I prepare the Additional Software upgrade process to fail
0.092
And
the network is plugged
0.071
And
available upgrades have been checked
3.878
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
2.641
And
I can open the Additional Software configuration window from the notification
4.931
And
I shutdown Tails and wait for the computer to power off
2:2.183
And
I start Tails from USB drive "__internal" with network unplugged
1:0.617
And
I enable persistence
13.720
And
I configure APT to prefer an old version of cowsay
0.033
And
I log in to a new session
40.252
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
31.681
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.068
And
the network is plugged
0.087
Then
the Additional Software upgrade service has started
0.184
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.081