And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
2:17.949
And
I configure APT to prefer an old version of cowsay
0.030
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
25.959
And
I accept adding "cowsay" to Additional Software
5.395
And
Additional Software is correctly configured for package "cowsay"
0.902
And
I shutdown Tails and wait for the computer to power off
6.353
And
I start Tails from USB drive "__internal" with network unplugged
58.551
And
I enable persistence
11.151
And
I configure APT to prefer an old version of cowsay
0.025
And
I disable the tails-virt-notify-user.service user unit
0.091
And
I log in to a new session
37.550
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
31.475
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.053
And
I prepare the Additional Software upgrade process to fail
0.073
And
the network is plugged
0.061
And
available upgrades have been checked
1.498
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
4.792
And
I can open the Additional Software configuration window from the notification
2.898
And
I shutdown Tails and wait for the computer to power off
13.462
And
I start Tails from USB drive "__internal" with network unplugged
58.778
And
I enable persistence
11.533
And
I configure APT to prefer an old version of cowsay
0.025
And
I log in to a new session
38.170
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
41.508
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.055
And
the network is plugged
0.064
Then
the Additional Software upgrade service has started
0.177
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.085