And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
2:19.724
And
I configure APT to prefer an old version of cowsay
0.026
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
26.974
And
I accept adding "cowsay" to Additional Software
6.829
And
Additional Software is correctly configured for package "cowsay"
1.092
And
I shutdown Tails and wait for the computer to power off
6.273
And
I start Tails from USB drive "__internal" with network unplugged
1:0.601
And
I enable persistence
13.041
And
I configure APT to prefer an old version of cowsay
0.035
And
I disable the tails-virt-notify-user.service user unit
0.080
And
I log in to a new session
38.713
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
41.420
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.057
And
I prepare the Additional Software upgrade process to fail
0.119
And
the network is plugged
0.071
And
available upgrades have been checked
1.285
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
5.680
And
I can open the Additional Software configuration window from the notification
3.123
And
I shutdown Tails and wait for the computer to power off
2:8.509
And
I start Tails from USB drive "__internal" with network unplugged
1:2.160
And
I enable persistence
12.951
And
I configure APT to prefer an old version of cowsay
0.028
And
I log in to a new session
42.283
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
41.756
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.068
And
the network is plugged
0.086
Then
the Additional Software upgrade service has started
0.205
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.091