And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
2:20.352
And
I configure APT to prefer an old version of cowsay
0.030
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
26.133
And
I accept adding "cowsay" to Additional Software
5.442
And
Additional Software is correctly configured for package "cowsay"
0.912
And
I shutdown Tails and wait for the computer to power off
4.317
And
I start Tails from USB drive "__internal" with network unplugged
1:0.392
And
I enable persistence
13.467
And
I configure APT to prefer an old version of cowsay
0.025
And
I disable the tails-virt-notify-user.service user unit
0.100
And
I log in to a new session
43.067
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
32.164
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.065
And
I prepare the Additional Software upgrade process to fail
0.075
And
the network is plugged
0.095
And
available upgrades have been checked
0.058
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
3.227
And
I can open the Additional Software configuration window from the notification
2.412
And
I shutdown Tails and wait for the computer to power off
18.225
And
I start Tails from USB drive "__internal" with network unplugged
59.526
And
I enable persistence
11.053
And
I configure APT to prefer an old version of cowsay
0.024
And
I log in to a new session
39.680
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
41.421
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.068
And
the network is plugged
0.086
Then
the Additional Software upgrade service has started
0.166
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.105