And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
2:20.215
And
I configure APT to prefer an old version of cowsay
0.034
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
26.163
And
I accept adding "cowsay" to Additional Software
6.795
And
Additional Software is correctly configured for package "cowsay"
0.954
And
I shutdown Tails and wait for the computer to power off
6.646
And
I start Tails from USB drive "__internal" with network unplugged
1:0.413
And
I enable persistence
12.936
And
I configure APT to prefer an old version of cowsay
0.033
And
I disable the tails-virt-notify-user.service user unit
0.091
And
I log in to a new session
43.972
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
31.606
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.049
And
I prepare the Additional Software upgrade process to fail
0.078
And
the network is plugged
0.060
And
available upgrades have been checked
0.096
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
4.967
And
I can open the Additional Software configuration window from the notification
3.242
And
I shutdown Tails and wait for the computer to power off
13.641
And
I start Tails from USB drive "__internal" with network unplugged
59.452
And
I enable persistence
13.263
And
I configure APT to prefer an old version of cowsay
0.024
And
I log in to a new session
39.032
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
41.160
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.062
And
the network is plugged
0.095
Then
the Additional Software upgrade service has started
0.187
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.088