And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
2:32.184
And
I configure APT to prefer an old version of cowsay
0.039
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
30.724
And
I accept adding "cowsay" to Additional Software
4.574
And
Additional Software is correctly configured for package "cowsay"
1.052
And
I shutdown Tails and wait for the computer to power off
6.408
And
I start Tails from USB drive "__internal" with network unplugged
1:2.447
And
I enable persistence
14.248
And
I configure APT to prefer an old version of cowsay
0.035
And
I disable the tails-virt-notify-user.service user unit
0.104
And
I log in to a new session
43.729
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
31.873
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.081
And
I prepare the Additional Software upgrade process to fail
0.066
And
the network is plugged
0.078
And
available upgrades have been checked
0.047
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
4.934
And
I can open the Additional Software configuration window from the notification
2.880
And
I shutdown Tails and wait for the computer to power off
12.957
And
I start Tails from USB drive "__internal" with network unplugged
1:2.434
And
I enable persistence
14.825
And
I configure APT to prefer an old version of cowsay
0.036
And
I log in to a new session
46.116
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
32.455
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.069
And
the network is plugged
0.073
Then
the Additional Software upgrade service has started
0.232
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.115