And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
2:31.981
And
I configure APT to prefer an old version of cowsay
0.026
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
30.155
And
I accept adding "cowsay" to Additional Software
6.139
And
Additional Software is correctly configured for package "cowsay"
0.986
And
I shutdown Tails and wait for the computer to power off
6.732
And
I start Tails from USB drive "__internal" with network unplugged
1:10.704
And
I enable persistence
16.228
And
I configure APT to prefer an old version of cowsay
0.037
And
I disable the tails-virt-notify-user.service user unit
0.103
And
I log in to a new session
47.172
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
31.242
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.054
And
I prepare the Additional Software upgrade process to fail
0.077
And
the network is plugged
0.063
And
available upgrades have been checked
0.372
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
8.388
And
I can open the Additional Software configuration window from the notification
2.731
And
I shutdown Tails and wait for the computer to power off
19.714
And
I start Tails from USB drive "__internal" with network unplugged
1:11.157
And
I enable persistence
14.283
And
I configure APT to prefer an old version of cowsay
0.028
And
I log in to a new session
48.062
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
43.555
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.062
And
the network is plugged
0.090
Then
the Additional Software upgrade service has started
0.171
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.094