And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
2:17.967
And
I configure APT to prefer an old version of cowsay
0.026
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
27.050
And
I accept adding "cowsay" to Additional Software
5.541
And
Additional Software is correctly configured for package "cowsay"
0.841
And
I shutdown Tails and wait for the computer to power off
6.494
And
I start Tails from USB drive "__internal" with network unplugged
1:0.841
And
I enable persistence
11.869
And
I configure APT to prefer an old version of cowsay
0.027
And
I disable the tails-virt-notify-user.service user unit
0.083
And
I log in to a new session
39.285
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
32.120
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.049
And
I prepare the Additional Software upgrade process to fail
0.076
And
the network is plugged
0.103
And
available upgrades have been checked
0.060
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
4.879
And
I can open the Additional Software configuration window from the notification
3.067
And
I shutdown Tails and wait for the computer to power off
17.613
And
I start Tails from USB drive "__internal" with network unplugged
59.967
And
I enable persistence
11.584
And
I configure APT to prefer an old version of cowsay
0.031
And
I log in to a new session
41.129
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
41.862
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.078
And
the network is plugged
0.060
Then
the Additional Software upgrade service has started
0.156
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.092