And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
2:55.252
And
I configure APT to prefer an old version of cowsay
0.025
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
26.414
And
I accept adding "cowsay" to Additional Software
7.107
And
Additional Software is correctly configured for package "cowsay"
1.118
And
I shutdown Tails and wait for the computer to power off
4.682
And
I start Tails from USB drive "__internal" with network unplugged
1:10.596
And
I enable persistence
23.156
And
I configure APT to prefer an old version of cowsay
0.026
And
I disable the tails-virt-notify-user.service user unit
0.102
And
I log in to a new session
41.148
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
42.776
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.069
And
I prepare the Additional Software upgrade process to fail
0.083
And
the network is plugged
0.102
And
available upgrades have been checked
0.081
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
5.649
And
I can open the Additional Software configuration window from the notification
3.954
And
I shutdown Tails and wait for the computer to power off
12.919
And
I start Tails from USB drive "__internal" with network unplugged
1:4.716
And
I enable persistence
15.927
And
I configure APT to prefer an old version of cowsay
0.056
And
I log in to a new session
41.564
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
32.322
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.067
And
the network is plugged
0.104
Then
the Additional Software upgrade service has started
0.159
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.085