And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
2:21.268
And
I configure APT to prefer an old version of cowsay
0.035
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
26.251
And
I accept adding "cowsay" to Additional Software
7.232
And
Additional Software is correctly configured for package "cowsay"
0.885
And
I shutdown Tails and wait for the computer to power off
6.537
And
I start Tails from USB drive "__internal" with network unplugged
1:0.051
And
I enable persistence
12.639
And
I configure APT to prefer an old version of cowsay
0.034
And
I disable the tails-virt-notify-user.service user unit
0.096
And
I log in to a new session
40.295
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
32.108
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.059
And
I prepare the Additional Software upgrade process to fail
0.065
And
the network is plugged
0.066
And
available upgrades have been checked
0.077
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
7.706
And
I can open the Additional Software configuration window from the notification
3.068
And
I shutdown Tails and wait for the computer to power off
18.973
And
I start Tails from USB drive "__internal" with network unplugged
59.743
And
I enable persistence
14.163
And
I configure APT to prefer an old version of cowsay
0.030
And
I log in to a new session
41.957
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
31.191
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.053
And
the network is plugged
0.071
Then
the Additional Software upgrade service has started
0.221
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.136