And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
2:28.967
And
I configure APT to prefer an old version of cowsay
0.046
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
28.779
And
I accept adding "cowsay" to Additional Software
4.487
And
Additional Software is correctly configured for package "cowsay"
0.859
And
I shutdown Tails and wait for the computer to power off
4.504
And
I start Tails from USB drive "__internal" with network unplugged
1:0.116
And
I enable persistence
13.137
And
I configure APT to prefer an old version of cowsay
0.026
And
I disable the tails-virt-notify-user.service user unit
0.084
And
I log in to a new session
40.472
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
30.920
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.056
And
I prepare the Additional Software upgrade process to fail
0.065
And
the network is plugged
0.078
And
available upgrades have been checked
5.926
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
2.325
And
I can open the Additional Software configuration window from the notification
3.656
And
I shutdown Tails and wait for the computer to power off
2:7.485
And
I start Tails from USB drive "__internal" with network unplugged
1:0.087
And
I enable persistence
14.540
And
I configure APT to prefer an old version of cowsay
0.024
And
I log in to a new session
40.880
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
41.041
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.054
And
the network is plugged
0.075
Then
the Additional Software upgrade service has started
0.209
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.075