And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
2:16.894
And
I configure APT to prefer an old version of cowsay
0.025
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
25.343
And
I accept adding "cowsay" to Additional Software
6.680
And
Additional Software is correctly configured for package "cowsay"
0.815
And
I shutdown Tails and wait for the computer to power off
4.311
And
I start Tails from USB drive "__internal" with network unplugged
56.913
And
I enable persistence
12.227
And
I configure APT to prefer an old version of cowsay
0.025
And
I disable the tails-virt-notify-user.service user unit
0.096
And
I log in to a new session
35.720
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
31.821
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.058
And
I prepare the Additional Software upgrade process to fail
0.081
And
the network is plugged
0.071
And
available upgrades have been checked
0.049
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
4.311
And
I can open the Additional Software configuration window from the notification
2.240
And
I shutdown Tails and wait for the computer to power off
13.545
And
I start Tails from USB drive "__internal" with network unplugged
58.252
And
I enable persistence
12.967
And
I configure APT to prefer an old version of cowsay
0.025
And
I log in to a new session
29.771
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
31.626
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.057
And
the network is plugged
0.065
Then
the Additional Software upgrade service has started
0.157
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.077