And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
2:12.917
And
I configure APT to prefer an old version of cowsay
0.027
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
25.586
And
I accept adding "cowsay" to Additional Software
5.363
And
Additional Software is correctly configured for package "cowsay"
0.861
And
I shutdown Tails and wait for the computer to power off
6.377
And
I start Tails from USB drive "__internal" with network unplugged
58.177
And
I enable persistence
12.117
And
I configure APT to prefer an old version of cowsay
0.024
And
I disable the tails-virt-notify-user.service user unit
0.081
And
I log in to a new session
39.980
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
31.468
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.055
And
I prepare the Additional Software upgrade process to fail
0.070
And
the network is plugged
0.068
And
available upgrades have been checked
0.057
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
4.247
And
I can open the Additional Software configuration window from the notification
2.839
And
I shutdown Tails and wait for the computer to power off
18.350
And
I start Tails from USB drive "__internal" with network unplugged
58.216
And
I enable persistence
11.680
And
I configure APT to prefer an old version of cowsay
0.028
And
I log in to a new session
37.160
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
41.622
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.057
And
the network is plugged
0.097
Then
the Additional Software upgrade service has started
0.183
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.111