And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
2:15.752
And
I configure APT to prefer an old version of cowsay
0.030
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
29.480
And
I accept adding "cowsay" to Additional Software
4.600
And
Additional Software is correctly configured for package "cowsay"
0.881
And
I shutdown Tails and wait for the computer to power off
6.649
And
I start Tails from USB drive "__internal" with network unplugged
1:0.132
And
I enable persistence
13.216
And
I configure APT to prefer an old version of cowsay
0.028
And
I disable the tails-virt-notify-user.service user unit
0.090
And
I log in to a new session
39.971
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
31.927
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.064
And
I prepare the Additional Software upgrade process to fail
0.059
And
the network is plugged
0.106
And
available upgrades have been checked
1.204
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
8.079
And
I can open the Additional Software configuration window from the notification
3.196
And
I shutdown Tails and wait for the computer to power off
19.163
And
I start Tails from USB drive "__internal" with network unplugged
1:2.355
And
I enable persistence
13.300
And
I configure APT to prefer an old version of cowsay
0.036
And
I log in to a new session
40.824
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
41.671
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.045
And
the network is plugged
0.073
Then
the Additional Software upgrade service has started
0.174
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.139