And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
2:33.004
And
I configure APT to prefer an old version of cowsay
0.033
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
30.730
And
I accept adding "cowsay" to Additional Software
4.481
And
Additional Software is correctly configured for package "cowsay"
0.979
And
I shutdown Tails and wait for the computer to power off
4.468
And
I start Tails from USB drive "__internal" with network unplugged
1:2.504
And
I enable persistence
13.181
And
I configure APT to prefer an old version of cowsay
0.026
And
I disable the tails-virt-notify-user.service user unit
0.098
And
I log in to a new session
40.156
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
41.497
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.081
And
I prepare the Additional Software upgrade process to fail
0.090
And
the network is plugged
0.099
And
available upgrades have been checked
0.065
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
4.755
And
I can open the Additional Software configuration window from the notification
4.045
And
I shutdown Tails and wait for the computer to power off
2:7.478
And
I start Tails from USB drive "__internal" with network unplugged
1:3.366
And
I enable persistence
14.904
And
I configure APT to prefer an old version of cowsay
0.026
And
I log in to a new session
44.526
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
33.597
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.068
And
the network is plugged
0.090
Then
the Additional Software upgrade service has started
0.210
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.099