And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
2:58.952
And
I configure APT to prefer an old version of cowsay
0.026
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
25.706
And
I accept adding "cowsay" to Additional Software
6.873
And
Additional Software is correctly configured for package "cowsay"
0.935
And
I shutdown Tails and wait for the computer to power off
6.452
And
I start Tails from USB drive "__internal" with network unplugged
1:0.849
And
I enable persistence
13.751
And
I configure APT to prefer an old version of cowsay
0.038
And
I disable the tails-virt-notify-user.service user unit
0.105
And
I log in to a new session
40.824
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
41.237
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.057
And
I prepare the Additional Software upgrade process to fail
0.069
And
the network is plugged
0.072
And
available upgrades have been checked
0.142
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
6.315
And
I can open the Additional Software configuration window from the notification
3.403
And
I shutdown Tails and wait for the computer to power off
2:2.039
And
I start Tails from USB drive "__internal" with network unplugged
1:1.220
And
I enable persistence
11.866
And
I configure APT to prefer an old version of cowsay
0.025
And
I log in to a new session
45.992
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
30.962
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.072
And
the network is plugged
0.078
Then
the Additional Software upgrade service has started
0.164
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.081