And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
2:33.308
And
I configure APT to prefer an old version of cowsay
0.027
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
29.619
And
I accept adding "cowsay" to Additional Software
3.289
And
Additional Software is correctly configured for package "cowsay"
1.005
And
I shutdown Tails and wait for the computer to power off
6.728
And
I start Tails from USB drive "__internal" with network unplugged
1:0.582
And
I enable persistence
12.317
And
I configure APT to prefer an old version of cowsay
0.029
And
I disable the tails-virt-notify-user.service user unit
0.089
And
I log in to a new session
45.368
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
31.234
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.058
And
I prepare the Additional Software upgrade process to fail
0.075
And
the network is plugged
0.102
And
available upgrades have been checked
2.654
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
4.845
And
I can open the Additional Software configuration window from the notification
3.667
And
I shutdown Tails and wait for the computer to power off
2:7.920
And
I start Tails from USB drive "__internal" with network unplugged
1:1.444
And
I enable persistence
13.114
And
I configure APT to prefer an old version of cowsay
0.035
And
I log in to a new session
40.452
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
41.521
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.077
And
the network is plugged
0.076
Then
the Additional Software upgrade service has started
0.223
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.091