And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
2:17.631
And
I configure APT to prefer an old version of cowsay
0.031
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
25.627
And
I accept adding "cowsay" to Additional Software
5.502
And
Additional Software is correctly configured for package "cowsay"
0.849
And
I shutdown Tails and wait for the computer to power off
4.369
And
I start Tails from USB drive "__internal" with network unplugged
58.877
And
I enable persistence
11.686
And
I configure APT to prefer an old version of cowsay
0.026
And
I disable the tails-virt-notify-user.service user unit
0.083
And
I log in to a new session
37.732
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
31.688
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.061
And
I prepare the Additional Software upgrade process to fail
0.069
And
the network is plugged
0.079
And
available upgrades have been checked
2.563
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
3.598
And
I can open the Additional Software configuration window from the notification
3.791
And
I shutdown Tails and wait for the computer to power off
13.022
And
I start Tails from USB drive "__internal" with network unplugged
57.903
And
I enable persistence
11.216
And
I configure APT to prefer an old version of cowsay
0.026
And
I log in to a new session
38.018
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
41.114
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.069
And
the network is plugged
0.076
Then
the Additional Software upgrade service has started
0.162
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.097