And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
2:59.690
And
I configure APT to prefer an old version of cowsay
0.037
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
25.900
And
I accept adding "cowsay" to Additional Software
6.685
And
Additional Software is correctly configured for package "cowsay"
0.972
And
I shutdown Tails and wait for the computer to power off
4.532
And
I start Tails from USB drive "__internal" with network unplugged
1:3.451
And
I enable persistence
13.073
And
I configure APT to prefer an old version of cowsay
0.031
And
I disable the tails-virt-notify-user.service user unit
0.109
And
I log in to a new session
40.970
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
42.261
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.073
And
I prepare the Additional Software upgrade process to fail
0.082
And
the network is plugged
0.085
And
available upgrades have been checked
0.122
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
7.663
And
I can open the Additional Software configuration window from the notification
2.692
And
I shutdown Tails and wait for the computer to power off
2:2.286
And
I start Tails from USB drive "__internal" with network unplugged
1:4.263
And
I enable persistence
15.840
And
I configure APT to prefer an old version of cowsay
0.036
And
I log in to a new session
50.923
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
41.521
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.084
And
the network is plugged
0.105
Then
the Additional Software upgrade service has started
0.189
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.109