And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
2:22.616
And
I configure APT to prefer an old version of cowsay
0.025
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
29.666
And
I accept adding "cowsay" to Additional Software
4.737
And
Additional Software is correctly configured for package "cowsay"
0.929
And
I shutdown Tails and wait for the computer to power off
6.308
And
I start Tails from USB drive "__internal" with network unplugged
1:1.256
And
I enable persistence
16.731
And
I configure APT to prefer an old version of cowsay
0.029
And
I disable the tails-virt-notify-user.service user unit
0.103
And
I log in to a new session
41.064
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
31.171
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.075
And
I prepare the Additional Software upgrade process to fail
0.070
And
the network is plugged
0.071
And
available upgrades have been checked
1.228
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
4.860
And
I can open the Additional Software configuration window from the notification
2.734
And
I shutdown Tails and wait for the computer to power off
17.108
And
I start Tails from USB drive "__internal" with network unplugged
1:3.135
And
I enable persistence
13.755
And
I configure APT to prefer an old version of cowsay
0.034
And
I log in to a new session
39.207
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
41.444
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.061
And
the network is plugged
0.073
Then
the Additional Software upgrade service has started
0.198
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.124