And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
2:18.666
And
I configure APT to prefer an old version of cowsay
0.033
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
25.941
And
I accept adding "cowsay" to Additional Software
5.175
And
Additional Software is correctly configured for package "cowsay"
0.860
And
I shutdown Tails and wait for the computer to power off
4.353
And
I start Tails from USB drive "__internal" with network unplugged
57.723
And
I enable persistence
10.611
And
I configure APT to prefer an old version of cowsay
0.027
And
I disable the tails-virt-notify-user.service user unit
0.090
And
I log in to a new session
37.793
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
41.710
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.060
And
I prepare the Additional Software upgrade process to fail
0.068
And
the network is plugged
0.079
And
available upgrades have been checked
1.101
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
4.354
And
I can open the Additional Software configuration window from the notification
3.218
And
I shutdown Tails and wait for the computer to power off
2:3.391
And
I start Tails from USB drive "__internal" with network unplugged
59.279
And
I enable persistence
12.308
And
I configure APT to prefer an old version of cowsay
0.024
And
I log in to a new session
43.043
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
31.146
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.064
And
the network is plugged
0.093
Then
the Additional Software upgrade service has started
0.162
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.102