And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
2:28.371
And
I configure APT to prefer an old version of cowsay
0.029
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
26.054
And
I accept adding "cowsay" to Additional Software
6.865
And
Additional Software is correctly configured for package "cowsay"
0.985
And
I shutdown Tails and wait for the computer to power off
6.411
And
I start Tails from USB drive "__internal" with network unplugged
1:0.562
And
I enable persistence
11.233
And
I configure APT to prefer an old version of cowsay
0.026
And
I disable the tails-virt-notify-user.service user unit
0.105
And
I log in to a new session
40.873
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
41.566
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.070
And
I prepare the Additional Software upgrade process to fail
0.071
And
the network is plugged
0.067
And
available upgrades have been checked
0.076
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
6.056
And
I can open the Additional Software configuration window from the notification
2.726
And
I shutdown Tails and wait for the computer to power off
2:9.001
And
I start Tails from USB drive "__internal" with network unplugged
1:0.738
And
I enable persistence
12.298
And
I configure APT to prefer an old version of cowsay
0.027
And
I log in to a new session
40.795
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
31.762
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.063
And
the network is plugged
0.077
Then
the Additional Software upgrade service has started
0.214
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.111