And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
2:15.152
And
I configure APT to prefer an old version of cowsay
0.027
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
25.469
And
I accept adding "cowsay" to Additional Software
5.442
And
Additional Software is correctly configured for package "cowsay"
0.859
And
I shutdown Tails and wait for the computer to power off
4.255
And
I start Tails from USB drive "__internal" with network unplugged
57.641
And
I enable persistence
12.406
And
I configure APT to prefer an old version of cowsay
0.024
And
I disable the tails-virt-notify-user.service user unit
0.092
And
I log in to a new session
44.747
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
31.687
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.061
And
I prepare the Additional Software upgrade process to fail
0.091
And
the network is plugged
0.081
And
available upgrades have been checked
0.068
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
5.064
And
I can open the Additional Software configuration window from the notification
3.529
And
I shutdown Tails and wait for the computer to power off
13.108
And
I start Tails from USB drive "__internal" with network unplugged
59.998
And
I enable persistence
13.549
And
I configure APT to prefer an old version of cowsay
0.030
And
I log in to a new session
43.704
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
31.075
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.054
And
the network is plugged
0.075
Then
the Additional Software upgrade service has started
0.181
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.084